PROGRAMME
This is the programme for the General Assembly. Click here to see the
FIG Congress 2015 web site.
Sunday, 17 May 2015
National Palace of Culture – Congress Centre Sofia (CCS) - Sofia,
Bulgaria |
Sunday
17 May 2014
|
09:00-12:30
13:30-16:00
Hall 3, 7th floor
|
General Assembly, First Session
|
Monday, 18 May – Wednesday, 20 May 2015
FIG 2015 Working Week and exhibition
National Palace of Culture – Congress Centre Sofia - Sofia, Bulgaria
www.fig.net/fig2015 |
Monday-Tuesday
18-19 May
|
To be announced later (See programme
for individual rooms) |
Annual Meetings of FIG Commissions
and Networks |
Tbc
|
To be announced later,
CCS, Sofia
|
FIG Member Associations Forum
These two sessions are reserved for Presidents or Heads of
delegation (or their representatives) of member associations to
discuss issue of their common interest. President of Chamber of
Surveyors, Bulgaria chairs the meeting.
By invitation only |
Wednesday
20 May
|
11:00-12:30 and 13:30-15:00
Congress Center Sofia
|
Director/Surveyor General Forum |
Tbc |
Congress Center Sofia |
Academic Members Forum |
Tbc
|
Congress Center Sofia
|
Corporate Members Forum |
Thursday, 21 May 2015
Congress Center Sofia, Bulgaria |
Thursday
21 May
|
Presidents’ Meeting
08:30 – 10:30
Tbc |
FIG Presidents’ Meeting
This event is convened by the FIG President and is reserved for
Presidents or Heads of delegation of Member Associations (or their
representatives)
By invitation only |
Thursday
21 May
|
11:00–12:30
13:30-15:00
Hall 3, 7th floor
CCS |
General Assembly, Second Session
including Closing Ceremony
Closing ceremony will start immediately after the conclusion of
the General Assembly and will be followed by the Farewell Reception
hosted by the New Zealand Institution of Surveyors, host of FIG
Working Week 2016. |
FIG 38th GENERAL ASSEMBLY
AGENDA
for the meetings to
be held on Sunday 17 May 2015 in Hall 3 and on Thursday 21 May
2015 in Hall 3 at the National Palace of Culture - Congress Centre
Sofia, Sofia, Bulgaria
Introduction
This online version of the agenda includes link to all
appendices in .pdf.
In addition to this on-line version, the agenda and its
appendices are published as one large .pdf file.
To download only the agenda in Acrobat format
please click here:
Agenda as circulated to the members 17 March 2015 (pdf, 24 pages)
-
Revised agenda as Adobe Acrobat version - version including all updates - (15 May 2015)
Note: Revisions are shown only on the .htm version
of the agenda and marked with colour.
To download the agenda with appendices as one file in
Acrobat format please click here:
Full Agenda incl. full bidding documents as PDF (482 pages - 24.97 MB)
as at the time when sent to members 17 March 2015.
Full Agenda excl. full bidding documents (261pages - 6.17 MB) as at the
time when sent to members 17 April 2015.
updated version
(15 May 2015)
Note: Revisions are shown only on the .htm
version of the agenda and marked with colour.
The individual appendix files can be downloaded below under
each item in Acrobat format.
PLEASE NOTE: Based on the decision from 2007 FIG
Office has sent members only the agenda without appendices as a hard copy.
Full agenda with all appendices can be downloaded from this web site. We
encourage you to use the online edition or otherwise to print the .pdf
version.
Changes to the agenda after it was
originally distributed as hard copy to the member associations are marked in
this agenda with colour and date.
List of Agenda Items
Sunday, 17 May, 09:00-12:30 and 13:30-16:00
- OPENING PROCEEDINGS
- ROLL CALL
- APPOINTMENT OF TELLERS
- ADOPTION OF THE AGENDA
- ADOPTION OF THE MINUTES OF THE 37th GENERAL ASSEMBLY
- MEMBERSHIP
- APPOINTMENT OF HONORARY MEMBERS
- PRESIDENT’S REPORT
- COUNCIL RESPONSES FROM GENERAL ASSEMBLY 2014
- REPORTS FROM THE DIRECTORS OF PERMANENT INSTITUTION
AND STANDARDS NETWORK 2014-15
- REPORT OF THE PRESIDENT OF THE FIG FOUNDATION
2013-2014
- FIG COUNCIL WORK PLAN 2015-2018
- COMMISSION WORK PLANS 2015-2018
- NEW NETWORK: REGIONAL CAPACITY DEVEOPMENT NETWORK
- NEW TASK FORCES 2015-2018
- FIG ACCOUNTS FOR 2014 AND AUDITOR’S REPORT AND BUDGETS
2015-2018
- SUBSCRIPTION RATES FOR 2017
- CO-OPERATION WITH THE UNITED NATIONS AND THE WORLD
BANK
- LIAISON WITH INTERNATIONAL PROFESSIONAL ORGANISATIONS
- DECISION ON THE VENUE FOR 2019 FIG WORKING WEEK –
PRESENTATION BY CANDIDATES
Thursday, 21 May, 8:30-10:30 –
Presidents' Meeting (by invitation only)
- FIG PRESIDENTS’ MEETING
Thursday, 21 May, 11:00–12:30 and 13:30-15:00
- ROLL CALL
-
MEMBERSHIP
-
REPORTS FROM ASSOCIATION, AFFILIATE,
ACADEMIC AND CORPORATE MEMBERS FORUM (IF ANY)
-
REPORTS FROM COMMISSIONS, NETWORKS, AND
TASK FORCES (IF ANY)
-
REPORTS FROM PERMANENT INSTITUTIONS (IF
ANY)
-
REPORT FROM FIG FOUNDATION (IF ANY)
-
DECISION ON THE VENUE FOR 2019 FIG WORKING
WEEK
-
REPORT ON THE FIG CONGRESS 2018, ISTANBUL,
TURKEY
-
REPORT ON THE FIG WORKING WEEK 2017,
HELSINKI, FINLAND
-
REPORT ON THE WORKING WEEK 2016 IN
CHRISTCHURCH, NEW ZEALAND
-
PRESENTATION OF CERTIFICATES OF
APPRECIATION
CLOSING CEREMONY
Sunday 17 May 2015
Sunday, 17 June, 09:00-13:00 and 14:00-17:00
Hall 3, National Palace of Culture
General Assembly, First Session
1. OPENING PROCEEDINGS
President Chryssy Potsiou to open the 38th General Assembly.
2. ROLL CALL
Vice President Rudolf Staiger to take the roll call.
Please note: The roll call will be done for member associations
and affiliate members only. Delegates representing academic members,
corporate members and correspondents as well as honorary presidents and
honorary members will be entered in the records but they shall register
before the meeting starts at the meeting venue to the staff of FIG Office.
Member associations are asked to inform the FIG Office by 12 April 2015
about their attendance, at the same time to submit the names of their
delegate(s) and to inform who their Head of the delegation is, if it is not
the President or Chair. Please use this special link below to inform us
about your delegation.
To register:
https://docs.google.com/forms/d/1cadnqGyWVECt806NSfextw42J-hK2uQ6NKvZDVkBmmU/viewform?usp=send_form
Since only member associations that have paid all their membership fees
to the end of 2014 are allowed to vote at the meeting, a list of member
associations that are not allowed to vote will be published and posted on
the FIG web site 15 April 2015.
Appendix to items 2 & 22:
Roll Call
Appendix to items 2 & 22:
List of member
associations that are not allowed to vote at the General Assembly
because of unpaid membership fees for 2014 and earlier -
updated 11 May 2015
Motion: That members present are recorded in the minutes.
Decision:
3. APPOINTMENT OF TELLERS
The General Assembly shall appoint two persons as tellers for the entire
General Assembly. The tellers will represent member association that hosted
the preceding (Dr. Zaid, President of PEJUTA, Malaysia) and the host of the proceeding following
General Assembly (Jeff Needham, President NZIS, New Zealand).
Motion: That the General Assembly appoints a representative from
PEJUTA and NZIS as tellers for this General Assembly.
Decision:
4. ADOPTION OF THE AGENDA
The Agenda for the General Assembly was issued as mandated, on 17 March
2015.
Motion: That the agenda be adopted.
Decision:
5. ADOPTION OF THE MINUTES OF THE 37th
GENERAL ASSEMBLY
Minutes have been circulated previously.
Appendix to item 5:
Minutes of the
General Assembly in Kuala Lumpur, Malaysia, June 2014, without appendices.
Motion: That the minutes be adopted as recorded.
Decision:
6. MEMBERSHIP
6.1 Member Associations
6.1.1 New Member Associations
There have been no new member association applications since 37th General
Assembly in 2014.
Two new applications for
member association have arrived and have been discussed at the Council
meeting who decided to bring forward the applications to the General
Assembly:
Colombian Society of
Surveyors, Sociedad Colombiana de Topografos (S.C.T.)
The Colombian Society of Surveyors has applied for
membership. The association was established in 1963. Their total membership
(all categories) is 70. Colombian Society of Surveyors fulfills the criteria
of FIG Member association. Application form is attached as
appendix to
agenda item 6.1
Distinctive Engineering
Group, Rwanda
The Distinctive Engineering Group, Rwanda has applied
for membership. The association was established on 27 March 2015. Their
total membership is 32, and the number of qualified members is 25.
Distinctive Engineering Group, Rwanda fulfills the criteria of FIG member
association. Application form is attached as
appendix to agenda item 6.1
Added 15 May 2015
Motion: That the General Assembly notes that there has not been any
new member association applications.
Decision:
6.1.2 College of Engineers and Surveyors of Puerto Rico (MA-10069)
FIG General Assembly expelled College of Engineers and Surveyors of
Puerto Rico (MA-10069) at the General Assembly meeting in 2014 due to the
fact that the association was in arrears for 3 years. FIG office has however
later received the full payment from College of Engineers and Surveyors of
Puerto Rico. FIG Council therefore proposes to cancel the expulsion and note
them as reinstalled as member of FIG.
Motion: That the General Assembly admits to reinstall College of
Engineers and Surveyors of Puerto Rico (MA-10069) as member association.
Decision/Action:
6.1.3 Geodetic Engineers of the Philippines, Inc. (MA-10107)
At the FIG General Assembly 2014 Geodetic Engineers of the Philippines,
Inc. (MA-10107) was supposed to be expelled from FIG but FIG Council
received a letter from the association that they would pay their arrears
before 1 October 2014. FIG Office received the payment and FIG Council
informs the General Assembly that they will remain as member.
Motion: That FIG General Assembly notes the update of Geodetic
Engineers of the Philippines (MA-10107) that they remain as member of FIG.
Decision/Action:
6.2 Expulsion of member associations
Subscriptions of following member associations are more than three years
in arrears:
- Ordre National des Geometres du Cameroun (MA-10015)
- Tunisian Association of Chartered Surveyors (MA-10086)
The General Assembly has power to expel from the Federation any member
association whose fees are in arrears and shall under normal circumstances
expel any member association whose fees are three years in arrears. (Article
4.3 of the Statutes). The FIG office has sent a letter to these associations
informing that if their membership fees are still in arrears at the time of
the General Assembly the General Assembly shall expel the above member
associations in Sofia.
The number of FIG member associations is 102 from 89 countries.
Motion: That the General Assembly expels the:
- Ordre National des Geometres du Cameroun (MA-10015)
- Tunisian Association of Chartered Surveyors (MA-10086)
Decision/Action:
6.3 Suspended status 2015
In accordance with its administrative measures, FIG Council, has deferred
to continue for 2015 the issuance of a membership subscription invoice to
the Order of Syrian Engineers and Architects, OSEA as all efforts to
maintain contact with them has not yielded results, will deem their
membership in suspension giving due consideration to its internal situation.
As reported in the General Assembly 2014, there remain existing sanctions on
Iran. The FIG office in Denmark cannot receive payments from Iranian
Professional Society of Surveying Engineers (ISS). Ukrainian Society of
Geodesy and Cartography has also gained suspended status and has not been
invoiced for 2014. Again in accordance with its administrative measures, FIG
Council deem their membership to be in suspension. The situation with these
associations will be reconsidered by Council again in 2016.
Motion: That the General Assembly notes the members with
suspension status.
Decision:
6.4 Other membership issues
6.4.1 Affiliate members
The Council has admitted the following national agencies to become
affiliate members:
- iTaukei Land Trust Board, Fiji – AF-20051
- Geospatial Information Authority of Japan/Geodetic Department –
AF-20052
- Guatemalan Registry of Cadastral Information (Registro de
Información Catastral de Guatemala – RIC), AF-20053
- Land Administration Authority (LAA) Lesotho – AF-20054
- General Direction of Land Registry, Mapping and
Cadastre, Benin Added 15 May 2015
The council has expelled the following affiliate members because of
unpaid membership subscriptions.
- National Land Centre in the Ministry of Natural Resources, Rwanda
(AF-20016)
- Bureau of Land Management, Department of Interior, USA (AF 20037)
- AIMS-Afghanistan Information Management Services, Afghanistan
(AF-20038)
After these changes the number of Affiliate members is 41 from 38
countries.
6.4.2 Corporate members
The Council has admitted the following companies as Corporate Members of
FIG after the General Assembly in 2014:
- Branco Etera Ltd, Kazakhstan – CM-30055 (Category F)
- NEH Engineering survey and mapping limited company, Vietnam –
CM-30056 (Category E)
- Ripro Corporation, Japan – CM-30057 (Category D)
- Datalife, Nigeria - CM- (Category F)
added 15 May 2015
Following corporate members have resigned from their membership from
1.1.2015:
- MondoGeo (category F –regional level)
Following corporate members have been expelled by FIG Council:
- Cameroon Engineering S.A., Cameroon (CM-30027 )
- SEPRET (Société des Etudes de Projets et Réalisation des Travaux,
S.A.R.L.), Morocco (CM-30031)
- Global Survey Qatar, Qatar (CM-30047)
After these changes the number of corporate members is now 21.
6.4.3 Academic members
FIG Council has admitted the following University to become Academic
member:
- Technical University of Civil Engineering - Faculty of Geodesy,
Bucharest, Romania (AC-40134)
- Sabaragamuwa University of Sri Lanka, Faculty of Geomatics
(AC-40135)
- Kwame Nkrumah University of Science and
Technology, Department of Geomatic Engineering, Ghana,
added 15 May 2015
The following academic members has terminated their membership:
- "TECRS" The Environmental Center of Remote Sensing Dept. of
Geosystem Technology, Saudi Arabia (AC-40117)
The Council has expelled following universities because of unpaid
membership subscriptions:
- Dublin Institute of Technology, Ireland (AC-40036) (has promised to
pay)
- Istanbul Technical University Dept. Geodesy & Photogrammetry, Turkey
(AC-40071) (has paid) amended 15 May
2015
- Neapolis University, Cyprus (AC-40114) (has promised to pay)
- IAV, Institut Agronomique et Vétérinaire Hassan II, Morocco
(AC-40118)
The number of Academic Members after these changes is 89/86 from 56/53
countries.
6.4.4 Correspondents
Council has ended its cooperation with two of the Correspondent Members
since General Assembly 2014 and the number of correspondents is now 1.
Motion: That the General Assembly notes the actions that the
Council has taken with other membership matters.
Decision:
7. APPOINTMENT OF HONORARY MEMBER
a. Christiaan Lemmen
Geo-Informatie Nederland GIN of the Netherlands has sent a nomination
letter in which it proposes that FIG appoints Christiaan Lemmen as an
Honorary Member of FIG.
FIG Council has considered the nomination and considers that it fulfils
the criteria (see criteria at:
http://www.fig.net/pub/figpub/pub40/figpub40.htm#Criteria) for an
Honorary Member and therefore proposes to the General Assembly that it
appoints Christiaan Lemmen as an Honorary Members of the Federation for the
outstanding services he has provided to the Federation.
b. Other potential nominations
Other potential nominations for Honorary Member might be considered by
the Council.
FIG Appreciation to Clarissa Augustinus
UN-Habitat
FIG Appreciation to Clarissa Augustinus UN-Habitat
Clarissa Augustinus, UN-Habitat, has worked closely with FIG for many years
and is now standing down from UN-HABITAT. FIG Council would like to
acknowledge the longstanding cooperation with Clarissa Augustinus. As a
special consideration FIG Council has decided to appreciate her as Honorary
Ambassador. Her certificate will be presented to her which will be given to
her during the Plenary session 2 on 19 May where she will be one of the
plenary speakers. added 15 May 2015
Appendix to item 7: The nomination letter from
Geo-Informatie Nederland GIN
Motion: That the General Assembly appoints Christiaan Lemmen as
Honorary Member of FIG and appoints other potential nominations if brought
forward by FIG Council. That the General Assembly
notes the special appreciation to Clarissa Augustinus.
added 15 May 2015
Decision:
Appointment of Honorary President
The Association of Authorised Land Surveyors Malaysia, PEJUTA has sent
FIG Council a proposal that it makes a nomination to the General Assembly of
appointing Mr CheeHai Teo, the immediate Past President of FIG as an
Honorary President of the Federation. The letter is attached as
appendix to
agenda item 7. FIG Concil has decided to bring forward this proposal to the
General Assembly, noting that CheeHai Teo fulfills the criteria for an
Honorary President and his achievements as the President have contributed
the Federation to extend that he without any doubt deserves to be appointed
as an FIG Honorary President.
Motion: That the General Assembly appoints CheeHai Teo
as FIG Honorary President.
Decision/action:
added 15 May 2015
8. PRESIDENT’S REPORT
President Chryssy Potsiou has prepared the President’s report on the
activities of the Federation since the General Assembly in Kuala Lumpur,
Malaysia in June 2014.
Appendix to item 8:
Motion: That the General Assembly accepts the President’s report.
Decision:
9. COUNCIL RESPONSES FROM GENERAL ASSEMBLY 2014
At the General Assembly 2014 the following items were discussed:
- Proposal from Geosuisse, Switzerland (1: nomination body; 2: VP’s
nominated through regional bodies; 3: Commission Chairs Elects elected
by the Commissions)
- Proposal from DdL, Denmark, on change of term for the President (to
start immediately after election)
- Surveyors day/week (Presented by John Hohol at the General Assembly
2014)
FIG Council promised to get back to the General Assembly 2015 with a
follow up and status on these issues.
Motion: That FIG General Assembly notes the update and records its
thanks to the submitters of the proposals for their active role in FIG.
Decision/Action:
10. REPORTS FROM THE DIRECTORS OF PERMANENT
INSTITUTIONS AND STANDARDS NETWORK 2014-15
10.1 International Office of Cadastre and Land Records (Office
International du Cadastre et du Régime Foncier) OICRF
Mr. Christiaan Lemmen, Director of OICRF has prepared a report on the
OICRF activities since the General Assembly in Kuala Lumpur. He will make a
short report to the General Assembly.
Appendix to item 10.1:
Report from the International Office of Cadastre and Land Records (Office
International du Cadastre et du Régime Foncier) OICRF.
Motion: That the General Assembly adopts the report and records
its thanks to the members of OICRF for their past year’s work and
contribution.
Decision:
10.2 International Institution for the History of Surveying and
Measurement, Permanent Institution of FIG
Mr. Jan de Graeve, Director of the IIHSM has prepared a report on the
IIHSM activities since the General Assembly in Kuala Lumpur. IIHSM will make
a short report to the General Assembly.
Appendix to item 10.2:
Report from the International Institution for the History of Surveying and
Measurement, Permanent Institution of FIG.
Motion: That the General Assembly adopts the report and records
its thanks to the Director and the members of the permanent institution for
their past year’s work and contribution.
Decision:
10.3 Standards Network
Mr David Martin, Chair of the FIG Standards Network has prepared a report
on the Standards Network activities since the General Assembly in Kuala
Lumpur. Standards Network will make a short report to the General Assembly
Appendix to item 10.3: Report from the Standards Network. To be
added
Motion: That the General Assembly adopts the report and records
its thanks to the Chair and the members of the permanent institution for
their past year’s work and contribution.
Decision:
11. REPORT OF THE PRESIDENT OF THE FIG FOUNDATION
2014-2015
Mr. John Hohol, President of the FIG Foundation has prepared a report on
the FIG Foundation activities from June 2014 to March 2015. He will make a
short report to the General Assembly.
Appendix to item 11:
Motion: That the General Assembly adopts the report of the
President of the FIG Foundation and records its thanks to the President and
members of the Board of Directors of the FIG Foundation for their past
year’s work.
Decision:
12. FIG COUNCIL WORK PLAN 2015-2018
The Council has prepared the FIG Council Work Plan for 20151-2018.
Together with the Commission Work Plans the Council Work Plan will form the
FIG Work Plan for the next four years. The proposal for the Council Work
Plan 2015-2018 is attached to the agenda and is based on preparations made
in a Council meeting and in a meeting with the Commission Chairs during the
Kick-Off Event in January 2015 in Athens, Greece as well as responses from
the Kick Off Event. The Council Work Plan has also been coordinated with the
Commissions', Networks', Task Forces’ and Permanent Institutions’ Work
Plans.
President Potsiou will present the Work Plan at the meeting.
The Council has also decided on responsibilities of individual Council
members. This list is included as an appendix to the Council Work Plan. An
up-to-date list will always be available on the FIG web site.
Appendix to item 12:
FIG Council Work Plan 2015-2018
Motion: That the General Assembly adopts the Council Work Plan for
2015-2018.
Decision:
13. COMMISSION WORK PLANS 2015-2018
Commission Chairs have prepared their Commission Work Plan for 2015-2018
based on discussions at their Commission meetings at the FIG Congress in
Kuala Lumpur. After Kuala Lumpur the Work Plans have been coordinated with
the Council Work Plan and with other Commission Work Plans at the meeting of
Commission chairs and the FIG Council in conjunction to the FIG Kick-Off
Meeting in January 2015 in Athens, Greece.
All Commission Work Plans have now been finalised and synchronised with
the Council Work Plan and are presented for the General Assembly for its
approval in Sofia in May 2015.
At the General Assembly time is reserved for the members to discuss the
Work Plans and Commission activities with the Commission Chairs. This
discussion will be chaired by Vice President Diane Dumashie, who will be
chairing ACCO (2015-2016), together with the ACCO representative Brian
Coutts (2015-2016).
Appendices to item 13:
Motion: That the General Assembly adopts the Commission Work
Plans.
Decision:
14. NEW NETWORK: REGIONAL CAPACITY DEVELOPMENT NETWORK
The Council has established a new Network. This network originates from
the Africa Task Force 2009-2014 and will in the term 2015-18 concentrate on
Africa. This Network is chaired by FIG Vice President Diane Dumashie. The
Network will work in close co-operation with all Commissions. The Network
will have its first meeting in Sofia where members of the Network will be
appointed by the Council and brought to the General Assembly for
endorsement.
Appendix to item 14.1:
Terms of Reference for the Network on Regional Capacity Development.
Motion: That the General Assembly records the Council’s decision
of establishment of the Regional Capacity Development Network, appointment
of Vice President Diane Dumashie to chair the Network and its terms of
reference for information.
Decision:
15. NEW TASK FORCES - 2015-2018
The Council has established four new Task Forces for 2015-2018.
15.1 Task Force on Real Property Markets
The first Task Force will assess the progress of establishing the real
property markets in the countries with economies in transition. The Task
Force will be chaired by Pekka Halme, Finnish Association of Geodetic and
Land Surveyors MIL. The Task Force will have its first meeting in Sofia
where members of the Task Force will be appointed by the Council and brought
to the General Assembly for endorsement.
Appendix to item 15.1:
Terms of Reference for the Task Force on Real Property Markets.
Motion: That the General Assembly records the Council’s decision
of establishment of the Task Force on Real Property Markets, appointment of
Pekka Halme to chair the Task Force and its terms of reference for
information.
Decision:
15.2 Task Force on Commission Structure
The second Task Force will assess the Commissions and investigate if
there is a need to revise their structure and provide a proposal on possible
improvements.
The Task Force is originated from two proposals from FIG Member
Associations.
One proposal originating from Geosuisse that was discussed at the General
Assembly 2014, who proposed:
For Commission Chairs Elect, the right to nominate should be with the
Commissions themselves. They have to evaluate the candidates and to make
sure that she/he is able to fulfil the responsibility. The Commissions are
the only bodies that have sufficient knowledge of their national delegates
and who are able to judge their eligibility. Commissions will discuss with
the national association the candidate they wish to nominate.
The second proposal that FIG Council has received is from the following
member associations:
- Danish Association of Chartered Surveyors (Denmark)
- Finnish Association of Geodetic and Land Surveyors MIL (Finland)
- Norges Jordskiftekandidatforening, faglig gruppe av Tekna (NJKF)
(Norway)
- Swedish professionals for the built environment
This proposal suggests evaluating the current Commission Structure in
order to secure the efficiency of the FIG Commissions. Based on the above
mentioned suggestions and further discussions in Council, Council has
decided to establish a Task Force that in general will assess and evaluate
the current structure of the commissions. The Task Force will be chaired by
Mikael Lilje, Swedish professionals for the built environment,
Samhällsbyggarna. The Task Force will have its first meeting in Sofia where
members of the Task Force will be appointed by the Council and brought to
the General Assembly for endorsement.
Appendix to item 15.2:
Terms of Reference for the Task Force on Commission Structure
Motion: That the General Assembly records the Council’s decision
of establishment of the Task Force on Commission Structure and the
appointment of Mikael Lilje to chair the Task Force and its terms of
reference for information.
Decision:
15.3 Task Force on Corporate Members
The third Task Force will be established to strengthen the FIG
relationship with corporate members. The Task Force will be chaired by John
Hohol, National Society of Professional Surveyors (NSPS) in cooperation with
Bryn Fosburgh, Vice President of Trimble. The Task Force will have its first
meeting in Sofia where members of the Task Force will be appointed by the
Council and brought to the General Assembly for endorsement.
Appendix to item 15.3:
Terms of Reference for the Task Force on Corporate Members.
Motion: That the General Assembly records the Council’s decision
of establishment of the Task Force on Corporate Members, appointment of John
Hohol in cooperation with Bryn Fosburgh to chair the Task Force and its
terms of reference for information.
Decision:
15.4 Task Force on Scientific Journal
The fourth Task Force will be established to investigate the usefulness
and need and if justified, the steps forward in order to introduce an FIG
peer review Journal (electronic or printed). The Task Force will be chaired
by Yerach Doytsher, Association of Licensed Surveyors in Israel (ALSI). The
Task Force will have its first meeting in Sofia where members of the Task
Force will be appointed by the Council and brought to the General Assembly
for endorsement.
Appendix to item 15.3:
Terms of Reference for the Task Force on Scientific Journal
Motion: That the General Assembly records the Council’s decision
of establishment of the Task Force on Scientific Journal, appointment of
Yerach Doytsher to chair the Task Force and its terms of reference for
information.
Decision:
16. FIG ACCOUNTS FOR 2014, AUDITOR's REPORT AND BUDGETS
2015-2018
Vice President Rudolf Staiger will present the report to the General
Assembly. This report includes the auditors report from 2014, official
accounts (income statement 2014) and balance sheet 31 December 2014, a
summary of 2014 accounts, an updated budget for 2015 and proposals for
budgets 2016-2018 with notes and proposal for membership fees for member
associations in 2017.
Appendix to item 09:
Report on Financial Issues (including 2014 accounts and budgets
2015-2018)
Annexes:
Motion: That the General Assembly
- adopts the audited accounts for 2014,
- adopts the Finance Report, and
- adopts budgets for 2015–2018
Decision:
17. SUBSCRIPTION RATES FOR 2017
The General Assembly has to set levels of fees for member associations
two years in advance of the year in which they become payable. Fees are
payable in respect of each individual member up to a maximum of 5,500
members. The membership fee structure was changed in 2009. Membership fees
have been discussed as part of the finance report, appendix to item 16.
The 2014 General Assembly approved membership fees as follows:
|
Per capita fee |
Minimum fee |
Maximum fee |
2016 |
€ 4.48 per member
up to a maximum of 5,500 members
Member associations from countries listed by the World Bank as
low-income economies or lower-middle-income economies shall pay
€ 2.24 member up to a maximum of 5,500 members. |
20 members or € 50
(whichever is greater) |
5,500 members (€ 24,640) |
The World Bank lists of the low-income economies and the
lower-middle-income economies are available at:
http://data.worldbank.org/about/country-classifications/country-and-lending-groups
The 2016 subscription fees were kept at the same level as for the years
2012-2015. The Council 2011-14 had to suggest subscription fees up to 2016,
however they recognised that there would be a change in leadership and the
subscription fees is dependent on the strategies of the council 2015-18.
Although the budgets 2017 and 18 show a deficit, Council is also
conscious of the economic condition that members are operating under and in
particular member’s challenges with their national membership and budgets.
Council wishes to respect this as well and both Council and FIG Office will
continue to be prudent in its financial management. Council therefore
proposes the level of subscription for member associations for 2017 to
remain at the same level as in the previous years. Council has initiated a
Task Force on how to attract corporate members and the hope is to increase
the fees received by corporate members to limit the deficit or turn it into
a positive result. FIG Council will evaluate after a year how this work
develops, and if the work on corporate members does not show positive
effect, Council suggests reconsidering the membership fee for 2017 at the
General Assembly in 2016.
Motion: That the General Assembly adopts following membership fees
payable by member associations in 2017:
|
Per capita fee |
Minimum fee |
Maximum fee |
2017 |
€4.48 per member
up to a maximum of 5,500 members
Member associations from countries listed by the World Bank as
low-income economies or lower-middle-income economies shall pay
€2.24 member up to a maximum of 5,500 members. |
20 members or €50
(whichever is greater) |
5,500 members (€24,640) |
Decision:
18. CO-OPERATION WITH THE UNITED NATIONS AND THE WORLD
BANK
18.1 Meetings and conferences
The main activities in the co-operation with the United Nations and the
World Bank since the FIG congress in Kuala Lumpur have been:
- President Teo participated in UNESCAP, FAO and UN-Habitat
co-organised Regional Multi-stakeholder Consultation on Land Tenure in
Asia-Pacific
- President Teo participated in 21st Meeting of the International
Steering Committee on Global Mapping, 5 August 2014, United Nations
Headquarters in New York
- President Teo participated in Fourth Session of the United Nations
Committee of Experts on Global Geospatial Information Management
(UN-GGIM), 6 – 8 August 2014, United Nations Headquarters in New York
- FIG Young Surveyors and UN-Habitat/GLTN organised a workshop on The
Social Tenure Domain Model – Training of Trainers, 7-10 November 2014 in
Addis Ababa, Ethiopia primarily for African particpants.
- Vice President Pengfei Cheng and Past President Teo attended the
Third High Level Forum on Global Geospatial Information Management,
22-24 October 2014, Beijing, PR China
- FIG undertook two expert group meetings in Bangkok in cooperation
with UN-Habitat/GLTN on Valuation of Unregistered Land and Properties
Expert Group Meeting, Bangkok, Thailand, 13 - 14 October 2014 and
Modernising Land Agencies Budgetary Approach: Costing and Financing of
Land Administration Services in Developing Countries, Validation
Workshop (CoFLAS), 15 - 16 October 2014, Bangkok, Thailand
- UN-GGIM-AP - Third Plenary Meeting 10 – 12 November 2014 Kuta, Bali,
Republic of Indonesia, represented by FIG Past President Teo.
- Ninth Meeting of the International Committee on Global Navigation
Satellite Systems (ICG-9), Mikael Lilje, Chair of FIG Commission 5 and
UNOOSA representative, 9 – 14 November 2014 Kuta, Prague, Czech Republic
FIG will be represented at the World Bank Conference March 2015 by
President Chryssy Potsiou. There will be a special side activity on the FIG
Work Plan.
18.2 Global Geodetic Reference Frame for Sustainable Development
resolution
At the FIG General Assembly 2014 FIG Council presented a FIG Statement on
Global Geodetic Reference Frame for Sustainable Development where FIG
expressed the importance of the resolution and urged the member
organizations to bring the Statement back home to the respective countries.
The Global Geodetic Reference Frame for Sustainable Development (GGRF)
resolution was adopted by the United Nations General Assembly on Thursday 26
February 2015
Motion: That the General Assembly adopts the report on the
co-operation between FIG and the United Nations, its agencies and the World
Bank and records its thanks to all those who have contributed to this
co-operation.
Decision:
19. LIAISON WITH INTERNATIONAL PROFESSIONAL
ORGANISATIONS
The Joint Board of Spatial Information Societies JB-GIS was formally
established during the FIG Working Week in Cairo in 2005 and meets annually
during a major conference. The meeting of JB-GIS in 2014 was held in August
2014 and was attended by nine of the ten participating international
organization. FIG has collaborative MoUs with a number of the organizations
who are part of JB-GIS.
FIG has further bilateral agreements of co-operation with several other
international associations like ISM, IFHP, CIB, ION, ICEC, FIABCI, IFHS,
PAIGH and PAQS.
President CheeHai Teo attended the International Union of Notaries
Conference on Land Tenure Security in Asia, 12-13 December 2014, Ho-Chi-Minh
City, Vietnam.
IPMS, is mainly driven by our member association RICS, and FIG was until
the end of last period represented by FIG Commission 9 Chair Frances
Plimmer, and FIG Council thanks her for her work. FIG Council will appoint a
new representative to IPMS. In December 2014 there was launch of a new
International Property Measurement Standard (IPMS) for Office Buildings.
FIG is a member of the International Council for Science (ICSU) and
working together with ISO and International Valuation Standards Committee
(IVSC) on standards.
Motion: That the General Assembly records the report on the
liaison with other international associations.
Decision:
20. DECISION OF THE VENUE FOR FIG
WORKING WEEK 2019 – PRESENTATION OF CANDIDATES
The FIG Working Weeks are organised by FIG together with a local member
association. FIG will together with the local member association have full
responsibility of the arrangements and of the financial result. This offers
FIG better opportunities in terms of organising events and generating
revenue. Therefore the Council has to ensure that all candidates are aware
of the role of FIG and split of responsibilities for organising the Working
Week. This General Assembly will decide on the host for the 2019 Working
Week.
The FIG Council has received five bids to host the FIG Working Week 2019,
and FIG Council thanks all bidding member associations for their special
engagement and contribution to FIG.
The Council has prepared a desktop summary on the bids and has also
carried out an evaluation together with the FIG Office that will be
presented at the General Assembly. In the summary report the following
considerations, as laid out in the invitation documentation, are described
for comparison:
- Rotation of the conferences (region);
- Country (hosting of earlier FIG events, experience);
- Member association (its activeness, commitment to FIG and to FIG
2017, execution ability for local association);
- Supporting organisations (local support to the Working Week,
governmental support, financial support, general support);
- Host city (characteristics and interest from congress programme
point of view, host city attractiveness, host city offerings);
- Venue (price/affordability, location of venue, internet availability
suitability of rooms, size of venue, structure and layout of the venue,
catering, value for money, hotels nearby facilities for exhibition);
- Accessibility (flight connections, several access possibilities,
security, visa issues, air fare to destination);
- Safety and security (political stability, airport safety, city
safety, political stability in the country - rating must be 3 or
higher);
- Proposed dates (must meet FIG requirements, Following FIG statutes,
practical dates, availability of venue, other conferences at the same
time)
- Technical programme (coverage of all FIG Commissions, potential
partners, originality, special ideas);
- Technical tours (coverage of all FIG Commissions, originality, ideas
proposed);
- Social programme (attractiveness and variety, proposals for dinners,
attractiveness of offered dinners, proposals for tours, is the programme
following the overall FIG concept);
- Attendance (expectation of international, regional and local
attendance, realistic number of international and national
participants);
- Finances (estimate of surplus and financial risks, realistic fees
proposed, fees in an acceptable price range, difference between
international and national fees, realistic budget, estimated revenue);
- Sponsorship (estimate sponsorship and exhibition income, proposed
income, how realistic is proposed income, local sponsor offerings,
sponsor interest to conference);
- Why host (reason for hosting);
- Objectives and outcomes (thought through why conference should be
held at destination, difference to other destinations, short term
outcome, long term outcome);
- Suggested theme (thought of possible theme that fits to
local/regional situation);
- Events organised in the past three years (how experienced is the
host in organising events)
- Major events planned in the proposed city in 2017 (many events might
affect the price level):
- Initiatives for sustainable conference environment (is host city,
venue and local host paying attention to environmental issues);
- New initiatives or activities (originality – but within the overall
FIG concept)
- What legacy to leave locally from the Working Week (with host,
hosting city, for the surveying community)
The summary report will not give a recommendation or a preference to any
candidate but it will provide useful information on each items listed above
and summarise the pros and cons of each candidate to assist the member
association in making their decision. General Assembly must note that,
especially in these past years, the issue of security and financial
viability has come to the fore. The purpose of the evaluation process is to
maintain the continued viability, high standard and quality of the FIG
Working Week.
The Council has considered the bids and has decided to present four of
the five submitted bids to the General Assembly for its decision. The
following four bids fulfilled the basic requirements:
a) Dublin, Ireland, Society of Chartered Surveyors, Ireland (RICS)
b) Nairobi, Kenya, Institution of Surveyors, Kenya
c) Geneva or Interlaken, Switzerland, geosuisse
d) Hanoi, Vietnam, The Vietnam Association of Geodesy, Cartography and
Remote Sensing (VGCR)
The General Assembly is recommended to read the summaries and the bids
carefully.
Appendix to item 20 and 28:
Summary Reports on the Bids for FIG 2019 Working Week
Bidding documents for FIG 2019 Working Week:
a) Dublin, Ireland, Society of Chartered Surveyors, Ireland (RICS) -
Summary -
Bidding document -
b) Nairobi, Kenya, Institution of Surveyors, Kenya -
Summary -
Bidding document -
c) Geneva or Interlaken, Switzerland, geosuisse -
Summary -
Bidding document -
d) Hanoi, Vietnam, The Vietnam Association of Geodesy, Cartography and
Remote Sensing (VGCR)
-
Summary -
Bidding document -
At the session each candidate will be given the same time (not more than
10 minutes) to make a presentation of their proposal and framework of the
Working Week and their bid. FIG Council will present its evaluation and the
impact on FIG on the various bids.
Decision on the venue of FIG 2019 Working Week will be made at the second
session of the General Assembly on 21 May. The voting will be made by blind
votes. If there will be no absolute majority in the first voting for any of
the proposals, a second vote will be organised between those two candidates
that have most votes.
Motion: That the General Assembly notes the submission, the
summary report, the presentations and FIG’s evaluation of the candidates,
makes its careful consideration and decision during the second session of
the General Assembly on 21 May.
Decision:
Thursday 21 May 2015
Thursday, 21 May, 08:30-10:30
Room to be announced,
National Palace of Culture - Congress Centre Sofia
Presidents’ Meeting (by invitation only)
21. FIG PRESIDENT'S MEETING
Separate invitation to Presidents of the Member
Associations.
Thursday, 21 May, 11:00–12:30 and 13:30-15:00
Hall 3, 7th floor,
National Palace of Culture - Congress Centre Sofia
General Assembly, Second Session and Closing Ceremony
22. ROLL CALL
Vice President Staiger to take the roll call.
Please note:
The roll call will be done for member associations and affiliate members
only. Delegates representing academic members, corporate members and
correspondents as well as honorary presidents and honorary members will be
entered in the records but they shall register before the meeting starts at
the meeting venue to the staff of FIG Office. Member associations are asked
to inform the FIG Office by 12 April 2015 about their attendance, at the
same time to submit the names of their delegate(s) and to inform who their
Head of the delegation is, if it is not the President or Chair. Please use
this special link below to inform us
about your delegation. Since only member associations that have paid all
their membership fees to the end of 2014 are allowed to vote at the meeting,
a list of member associations that are not allowed to vote will be published
and posted on the FIG web site 15 April 2015.
To be noted that the General Assembly has appointed a representative from
PEJUTA, Malaysia and from NZIS, New Zealand as tellers to this session of
the General Assembly.
Appendix to items 2 & 22:
Roll Call
Appendix to items 2 & 22:
List of member
associations that are not allowed to vote at the General Assembly
because of unpaid membership fees for 2014 and earlier -
updated 11 May 2015
Motion: Those members present are recorded in the minutes.
Decision:
23. MEMBERSHIP
The Council will decide on other membership issues considered in Kuala
Lumpur and bring them for the General Assembly for decision or information
as necessary.
Member Associations
Licensed Surveyors Association of Ghana (LISAG) The Licensed Surveyors Association of Ghana (LISAG) has applied for
membership. Their number of members is 100. Licensed Surveyors Association
of Ghana fulfils the criteria of FIG Member association. The application has
been approved by the existing member association from Ghana, Ghana
Institution of Surveyors. Application form is attached as appendix to agenda
item 23.1. (to be added) Motion: That the General Assembly decides on the membership
issues based on the proposal of the Council. That the General Assembly admits the Licensed Surveyors Association of Ghana
(LISAG) to become member association of FIG Added 21 May 2015
Decision: Other membership matters The Council has admitted the following academic member:
The Council has admitted the following corporate member
- Innovation for Trading and Contracting
(Category F)
Motion: That the General Assembly notes the actions that
the Council has taken with other membership matters.
Decision:
Added 21 May 2015
Motion: That the General Assembly decides on
the membership issues based on the proposal of the Council.
Decision:
24. REPORTS FROM ASSOCIATION, AFFILIATE, ACADEMIC AND
CORPORATE MEMBERS FORUM (IF ANY)
During the Working Week there will be Member Association Forum, the
Director General’s/Affiliate Members Forum, Academic Members Forum and
Corporate Members Meeting. They may report back to the General Assembly on
any issues that may need the endorsement of or are of general interest to
the General Assembly.
Motion: That the General Assembly records the report(s)
Decision:
25. REPORTS FROM COMMISSIONS, NETWORKS AND TASK FORCES
(IF ANY)
Commission Officers (ACCO), Commissions, Networks and Task forces will
have their annual and other administrative meetings in Sofia. They may
report back to the General Assembly on any issues that may need the
endorsement of or are of general interest to the General Assembly.
Motion: That the General Assembly records the report(s).
Decision:
ITEM 15.2 Task Force to assess the commission
structure
It was decided at the first General Assembly on 15 May 2015 to wait with the
motion for agenda item 15.2, to establish a Task Force to assess the
commission structure, until it was discussed during the working week.
Motion: The GA endorses the Council’s proposal to
establish a task force to assess the commission structure.
Decision:
ITEM 15.4 Task force on Scientific Journal
It was decided at the first General Assembly on 15 May 2015 to wait with the
motion for agenda item 15.4, the establishment of a Task Force on Scientific
Journal, until it was discussed during the working week
Motion: The GA endorses the council’s proposal to establish
a task force on Scientific Journal
Decision:
Added 21 May 2015
26. REPORTS FROM PERMANENT INSTITUTIONS (IF ANY)
The permanent institutions will have various activities during the
congress. They may report back to the General Assembly on any matters of
general interest.
Motion: That the General Assembly records the report(s).
Decision:
27. REPORT FROM FIG FOUNDATION (IF ANY)
A meeting for FIG Foundation is organised in Kuala Lumpur and various
activities are taking place during the Congress. They may report back to the
General Assembly on any matters of general interest.
Motion: That the General Assembly records the report.
Decision:
28. DECISION ON THE VENUE FOR 2019 FIG WORKING WEEK
Candidates for FIG 2019 Working Week have made their presentations in the
first session of the General Assembly and FIG Council has presented its
evaluation. The decision will be made between:
- Dublin, Ireland, Society of Chartered Surveyors, Ireland (RICS)
- Nairobi, Kenya, Institution of Surveyors, Kenya
- Geneva or Interlaken, Switzerland, geosuisse
- Hanoi, Vietnam, The Vietnam Association of Geodesy, Cartography and
Remote Sensing (VGCR)
The decision will take place by blind votes following the FIG statutes
and internal rules. If there will be no absolute majority in the first round
of voting, a second vote will be organised between those two candidates that
have most votes.
Motion: This General Assembly decides the host and venue for FIG
2019 Working Week.
Decision:
29. REPORT ON THE FIG CONGRESS 2018 IN ISTANBUL, TURKEY
Co-congress director Orhan Ercan from the Chamber of Surveying Cadastre
Engineers of Turkey will give a presentation on the preparations of FIG
Congress 2018.
Motion: That the General Assembly records the report
Decision:
30. REPORT ON THE FIG WORKING WEEK 2017 IN HELSINKI,
FINLAND
Representatives from the Local Organising Committee from the Finnish
Associations MIL and MAKLI will give a presentation on preparations of FIG
Working Week 2017.
Motion: That the General Assembly records the report.
Decision:
31. REPORT ON THE FIG WORKING WEEK 2016 IN
CHRISTCHURCH, NEW ZEALAND
Representatives from the Local Organising Committee from New Zealand
Institute of Surveyors will give a presentation on preparations of FIG
Working Week 2016.
Motion: That the General Assembly records the report.
Decision:
32. PRESENTATION OF CERTIFICATES OF APPRECIATION
CLOSING CEREMONY
Data supplied by the FIG Office.
Whilst every effort has been made to ensure that this data
is accurate errors might exist. Requests for updates and corrections should
be emailed to the FIG Office.
|